Menu
Back
  1. Products
  2. Automation technology - Solenoid valve connectors
  3. Model A
  4. Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit P40, with LED PNP
Part no.: 43 1730 140 03

Female power connector, Contacts: 2+PE, 6.0-8.0 mm, unshielded, screw clamp, IP40 without seal, Circuit P40, with LED PNP

Size A, series 210, Automation Technology - Solenoid Valve Connectors
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 43 1730 140 03
Connector design Female power connector
Type standard DIN EN 175301-803
Version Connector socket straight
Connector locking system Central bolt
Termination screw clamp
Degree of protection IP40 without seal
IP65 with seal, see accessories
Cross-sectional area 0.34-1.50 mm²
Cable outlet 6.0-8.0 mm
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 50 Mating cycles
Additional information Circuit P40
with LED PNP
Weight (g) 28.72
Customs tariff number 85369010
Country of Origin HU
Rated voltage 230 V
Rated impulse voltage 4000 V
Rated current 2.0 A
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Wiring P40
Housing material PC
Contact body material PA (UL94 HB)
Contact material CuSn (bronze)
Contact plating Ni (nickel)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 0dfeefc7-c39a-4408-b81d-1ab6618b2e46
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Downloads
Data sheet
Data sheet 43 1730 140 03
PDF
REACH
43 1730 140 03
PDF
RoHS
43 1730 140 03
PDF
China RoHS
43 1730 140 03
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Model A
43 1730 140 03