|Part no.||99 0641 10 05|
|Connector design||Male panel mount connector|
|Version||Connector pin straight|
|Connector locking system||M12x1|
|Degree of protection||IP67|
|Temperature range from/to||-40 °C / 105 °C|
|Mechanical operation||> 100 Mating cycles|
|Customs tariff number||85369010|
|Rated voltage||63 V|
|Rated impulse voltage||1500 V|
|Rated current (40 °C)||16.0 A|
|Insulation resistance||> 10¹⁰ Ω|
|Insulating material group||II|
|Housing material||Zinc die-cast nickel-plated|
|Contact body material||PA (UL94 V-0)|
|Contact material||CuZn (brass) / CuSn (bronze)|
|Contact plating||Au (gold)|
|Locking material||Zinc die-cast nickel-plated|
CAS 7439-92-1 (Lead)|
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).