Ordering no:
Female angled connector, cable outlet 6-8 mm
Female angled connector, cable outlet 6-8 mm, Series
Available numbers of contacts
99 0602 72 02
Bayonet female angled connector, Contacts: 2, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0602 72 02
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.614 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
99 0606 72 03
Bayonet female angled connector, Contacts: 3 DIN, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0606 72 03
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.738 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
99 0610 72 04
Bayonet female angled connector, Contacts: 4, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0610 72 04
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.921 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
99 0614 72 05
Bayonet female angled connector, Contacts: 5, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0614 72 05
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.015 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
99 0618 72 06
Bayonet female angled connector, Contacts: 6 DIN, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0618 72 06
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.221 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
99 0622 72 07
Bayonet female angled connector, Contacts: 7, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0622 72 07
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.325 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
99 0646 72 08
Bayonet female angled connector, Contacts: 8 DIN, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0646 72 08
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 5 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.78 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
99 0650 72 12
Bayonet female angled connector, Contacts: 12, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0650 72 12
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.807 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
99 0654 72 14
Bayonet female angled connector, Contacts: 14, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0654 72 14
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 13.925 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
99 0658 72 16
Bayonet female angled connector, Contacts: 16, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0658 72 16
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.051 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
99 0666 72 19
Bayonet female angled connector, Contacts: 19, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0666 72 19
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.206 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
99 0670 72 24
Bayonet female angled connector, Contacts: 24, 6.0 - 8.0 mm, Shielding is not possible, solder, IP40
Bayonet, series 678, Miniature connectors
| Order number |
99 0670 72 24
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0.14 mm² |
| Wire gauge (AWG) | 26 |
| Cable outlet | 6.0 - 8.0 mm |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 1 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Insulation resistance | ≥ 10¹⁰ Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PBT (UL 94 V-0) |
| Housing material | PA |
| Connector design | female angled connector |
| Customs tariff number | 85369010 |
| Weight (g) | 14.078 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?