Ordering no:
Female cable connector with cable clamp, screw terminal connection, shieldable, PG 9, cable outlet 6-8 mm
Female cable connector with cable clamp, screw terminal connection, shieldable, PG 9, cable outlet 6-8 mm, Series 423
Available numbers of contacts
99 5606 210 03
M16 IP67 female cable connector, Contacts: 3, 6,0 - 8,0 mm, shieldable, screw clamp, IP67, UL
M16, series 423, Miniature connectors
| Order number |
99 5606 210 03
|
| Connector locking system | bolted |
| Termination | screw clamp |
| Wire gauge (mm) | 0.25 - 1.5 mm² |
| Wire gauge (AWG) | 24-16 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 95 °C |
| Lower limit temperature | -30 °C |
| Rated current (40 °C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Approval 1 | UL |
| Customs tariff number | 85369010 |
| Weight (g) | 49.343 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Downloads
Data sheet
Certificates
CAD files
99 5610 210 04
M16 IP67 female cable connector, Contacts: 4, 6,0 - 8,0 mm, shieldable, screw clamp, IP67, UL
M16, series 423, Miniature connectors
| Order number |
99 5610 210 04
|
| Connector locking system | bolted |
| Termination | screw clamp |
| Wire gauge (mm) | 0.25 - 1.5 mm² |
| Wire gauge (AWG) | 24-16 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 95 °C |
| Lower limit temperature | -30 °C |
| Rated current (40 °C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Approval 1 | UL |
| Customs tariff number | 85369010 |
| Weight (g) | 49.92 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Downloads
Data sheet
Certificates
CAD files
99 5614 210 05
M16 IP67 female cable connector, Contacts: 5, 6,0 - 8,0 mm, shieldable, screw clamp, IP67, UL
M16, series 423, Miniature connectors
| Order number |
99 5614 210 05
|
| Connector locking system | bolted |
| Termination | screw clamp |
| Wire gauge (mm) | 0.25 - 1.5 mm² |
| Wire gauge (AWG) | 24-16 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 95 °C |
| Lower limit temperature | -30 °C |
| Rated current (40 °C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Insulating material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Contact body material | PBT (UL 94 V-0) |
| Approval 1 | UL |
| Customs tariff number | 85369010 |
| Weight (g) | 50.212 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Downloads
Data sheet
Certificates
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?