Available numbers of contacts
09 4907 025 03
Push-Pull male panel mount connector, Contacts: 3, Shielding is not possible, solder, IP40
Push Pull, series 430, Subminiature connectors
| Order number |
09 4907 025 03
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | I |
| Insulating material group | II |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT, PA |
| Connector design | male panel mount connector |
| Customs tariff number | 85369010 |
| Weight (g) | 9.722 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
09 4911 025 04
Push-Pull male panel mount connector, Contacts: 4, Shielding is not possible, solder, IP40
Push Pull, series 430, Subminiature connectors
| Order number |
09 4911 025 04
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | I |
| Insulating material group | II |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT, PA |
| Connector design | male panel mount connector |
| Customs tariff number | 85369010 |
| Weight (g) | 9.798 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
09 4927 025 07
Push-Pull male panel mount connector, Contacts: 7, Shielding is not possible, solder, IP40
Push Pull, series 430, Subminiature connectors
| Order number |
09 4927 025 07
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0.14 mm² |
| Wire gauge (AWG) | 26 |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 1 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | I |
| Insulating material group | II |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT, PA |
| Connector design | male panel mount connector |
| Customs tariff number | 85369010 |
| Weight (g) | 9.763 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
09 4931 025 08
Push-Pull male panel mount connector, Contacts: 8, Shielding is not possible, solder, IP40
Push Pull, series 430, Subminiature connectors
| Order number |
09 4931 025 08
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0.14 mm² |
| Wire gauge (AWG) | 26 |
| EMC compliance | Shielding is not possible |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Temperature range from/to | – 40 °C / 85 °C |
| Rated current (40 °C) | 1 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | I |
| Insulating material group | II |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT, PA |
| Connector design | male panel mount connector |
| Customs tariff number | 85369010 |
| Weight (g) | 9.802 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?