Menu
Back
  1. Products
  2. Miniature connectors
  3. Bayonet NCC
  4. Bayonet Male angled connector, Contacts: 8, 4.0-6.0 mm, unshielded, solder, IP67
Part no.: 99 0773 001 08

Bayonet Male angled connector, Contacts: 8, 4.0-6.0 mm, unshielded, solder, IP67

Bayonet NCC, series 770, Miniature Connectors
Compare product
Downloads
General features
Moreless
Part no. 99 0773 001 08
Connector design Male angled connector
Version Connector pin straight
Connector locking system Bayonet
Termination solder
Degree of protection IP67
Cross-sectional area 0.25 mm² / AWG 24
Cable outlet 4.0-6.0 mm
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 5000 Mating cycles
Weight (g) 12.89
Customs tariff number 85369010
Country of Origin DE
Rated voltage 175 V
Rated impulse voltage 1750 V
Rated current 2.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 2
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material PA
Contact body material PA (UL94 HB)
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 96-45-7 (Imidazolidine-2-thione)
CAS 7439-92-1 (Lead)
SCIP number 88c1a5c0-2fd7-4043-907f-1b196ee055d4
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 99 0773 001 08
PDF
REACH
99 0773 001 08
PDF
RoHS
99 0773 001 08
PDF
China RoHS
99 0773 001 08
PDF
CAD files
Select required format
Bayonet NCC
99 0773 001 08