Part no.: 99 3443 200 05
M12 Square male panel mount connector, Contacts: 5, unshielded, solder, IP69k, IP68, IP67, UL, positionable, lockable, Square housing 20 mm
M12-A, series 763, Automation Technology - Sensors and Actuators
General features
MorelessPart no. | 99 3443 200 05 |
Connector design | Square male panel mount connector |
Type standard | DIN EN 61076-2-101 |
Version | Connector pin straight |
Connector locking system | screw |
Termination | solder |
Degree of protection | IP69k, IP68, IP67 |
Cross-sectional area | 0.34 mm² / AWG 22 |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 100 Mating cycles |
Additional information |
positionable, lockable Square housing 20 mm |
Weight (g) | 8.73 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 60 V |
Rated impulse voltage | 1500 V |
Rated current | 4 A (3 A UL) |
Insulation resistance | > 108 Ω |
Pollution degree | 3 |
Insulating material group | II |
EMC compliance | unshielded |
Material
MorelessHousing material | Zinc die-cast nickel-plated |
Contact body material | PA (UL94 V-0) black |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 7e8861f1-5d1f-4a5c-8e8e-a2ee8df48d93 |
Authorization/approvals
MorelessApprovals | UL |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
- The protection class specification applies on condition that the four mounting holes are made as blind holes.
Downloads