Menü
vissza
  1. Termékek
  2. Automatizálási technológia - érzékelők és aktuátorok
  3. M8
  4. M8 panelre szerelhető foglalat, : 4, árnyékolatlan, sodrott vezeték, IP67/IP69K, M12x1,0, hátsó panel felszerelés
Cikkszám: 09 3390 86 04

M8 panelre szerelhető foglalat, : 4, árnyékolatlan, sodrott vezeték, IP67/IP69K, M12x1,0, hátsó panel felszerelés

M8, 718-es sorozat, Automatizálási technológia - érzékelők és aktuátorok
Ennek a cikknek van egy újabb verziója
A régi/új verzió közvetlen összehasonlítása
Elérhető Pólusszámok
Hasonlítsa össze a terméket
Letöltések
Általános jellemzők
továbbkevesebb
Alkatrész sz. 09 3390 86 04
Csatlakozó kialakítása panelre szerelhető foglalat
Szabványos típus DIN EN 61076-2-104
Vezeték hossza 0,2 m (Standard 0,2 m. Kérésre más hosszúságok is rendelhetők).
Verzió Csatlakozó aljzat egyenes
Rögzítés módja bepattint + csavaros rögzítés
Csatlakoztatás típusa sodrott vezeték
Védelmi szint IP67/IP69K
Csatlakozási keresztmetszet 0,25 mm² / AWG 24
Hőmérséklet tartomány tól/ig -40 °C / 85 °C
Mechanikus élettartam > 100 csatlakoztatási ciklusok
Tömeg (gr) 15.16
Vámtarifaszám 85369010
Származási ország DE
Névleges feszültség 50 V (AC ) / 60 V (DC)
Névleges impulzusfeszültség 1500 V
Névleges áramerősség 4,0 A
Szennyezettségi fok 3
Túlfeszültség kategória II
Anyagcsoport II
EMV megfelelőség árnyékolatlan
Az érintkező test anyaga PA fekete
Érintkező anyaga CuSn (bronz)
Érintkező bevonat Au (arany)
REACH SVHC CAS 7439-92-1 (Lead)
Jelen lévő PFAS 3d0a9cf8-14f2-4f66-94b6-503b91376177
eCl@ss 11.1 27-44-01-03
ETIM 9.0 EC003569
Biztonsági figyelmeztetések
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Letöltések
Adatlap
Adatlap 09 3390 86 04
PDF
REACH
09 3390 86 04
PDF
RoHS
09 3390 86 04
PDF
China RoHS
09 3390 86 04
PDF

Ellenőrzés a letöltéshez

Kérjük, fejezze be az ellenőrzést a CAD letöltés folytatásához.

CAD fájlok
Válassza ki a kívánt formátumot
M8
09 3390 86 04