Menü
vissza
  1. Termékek
  2. Automatizálási technológia - érzékelők és aktuátorok
  3. M8
  4. M8 beépíthető csatlakozó, : 3, árnyékolatlan, kézi forrasztású, IP65
Cikkszám: 09 3411 00 03

M8 beépíthető csatlakozó, : 3, árnyékolatlan, kézi forrasztású, IP65

M8, 718-es sorozat, Automatizálási technológia - érzékelők és aktuátorok
Elérhető Pólusszámok
Hasonlítsa össze a terméket
Letöltések
Általános jellemzők
továbbkevesebb
Alkatrész sz. 09 3411 00 03
Csatlakozó kialakítása beépíthető csatlakozó
Szabványos típus DIN EN 61076-2-104
Verzió Csatlakozó stift egyenes
Rögzítés módja bepattintós
Csatlakoztatás típusa kézi forrasztású
Védelmi szint IP65
Csatlakozási keresztmetszet 0,25 mm² / AWG 24
Hőmérséklet tartomány tól/ig -25 °C / 70 °C
Mechanikus élettartam > 100 csatlakoztatási ciklusok
Tömeg (gr) 0.87
Vámtarifaszám 85369010
Származási ország DE
Névleges feszültség 50 V (AC ) / 60 V (DC)
Névleges impulzusfeszültség 800 V
Névleges áramerősség 4,0 A
Szennyezettségi fok 3
Túlfeszültség kategória II
Anyagcsoport II
EMV megfelelőség árnyékolatlan
A ház anyaga CuZn (nikkelezett sárgaréz)
Az érintkező test anyaga PA
Érintkező anyaga CuZn (sárgaréz)
Érintkező bevonat Au (arany)
REACH SVHC CAS 7439-92-1 (Lead)
Jelen lévő PFAS 50f374e0-5b24-495a-a292-3168b39ebae9
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Biztonsági figyelmeztetések
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Letöltések
Adatlap
Adatlap 09 3411 00 03
PDF
REACH
09 3411 00 03
PDF
RoHS
09 3411 00 03
PDF
China RoHS
09 3411 00 03
PDF
EPLAN adatok
09 3411 00 03

Ellenőrzés a letöltéshez

Kérjük, fejezze be az ellenőrzést a CAD letöltés folytatásához.

CAD fájlok
Válassza ki a kívánt formátumot
M8
09 3411 00 03