Cikkszám: 77 1434 0000 50003-1000
7/8" derékszögű aljzat, : 3, árnyékolatlan, kábelre öntött, IP68, UL 2238, PUR, fekete, 3 x 1,50 mm², 10 m
7/8", 870-es sorozat, Automatizálási technológia - feszültség tápellátás
Általános jellemzők
továbbkevesebbAlkatrész sz. | 77 1434 0000 50003-1000 |
Csatlakozó kialakítása | derékszögű aljzat |
Kábelhosszúság | 10 m (Kérésre más hosszúságok is rendelhetők). |
Verzió | Csatlakozó aljzat derékszögű |
Rögzítés módja | csavar |
Csatlakoztatás típusa | kábelre öntött |
Védelmi szint | IP68 |
Csatlakozási keresztmetszet | 1,50 mm² / AWG 16 |
Hőmérséklet tartomány tól/ig | -25 °C / 80 °C |
Mechanikus élettartam | > 100 csatlakoztatási ciklusok |
Tömeg (gr) | 1347.5 |
Vámtarifaszám | 85444290 |
Származási ország | DE |
Elektromos paraméterek
továbbkevesebbNévleges feszültség | 300 V (600 V UL) |
Névleges impulzusfeszültség | 2500 V |
Névleges áramerősség | 13,0 A |
Szennyezettségi fok | 3 |
Túlfeszültség kategória | II |
Anyagcsoport | I |
EMV megfelelőség | árnyékolatlan |
Anyag
továbbkevesebbA ház anyaga | PUR |
Az érintkező test anyaga | PUR |
Érintkező anyaga | CuSn (bronz) |
Érintkező bevonat | Au (arany) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
Jelen lévő PFAS | 253cf71b-0891-4a3d-9172-20f0db944da2 |
Tanúsítások
továbbkevesebbTanúsítások | UL 2238 |
Osztályozások
továbbkevesebbeCl@ss 11.1 | 27-06-03-11 |
ETIM 9.0 | EC002638 |
Megfelelőségi nyilatkozatok
továbbkevesebbKisfeszültségű irányelv | 2014/35/EU (EN 60529:1991;EN 60204-1:2018) |
Szűrés kábeladatok alapján
továbbkevesebbA kábel felépítése | |
Kábel átmérő | 7,4 mm |
Keresztmetszet | 3 x 1,50 mm² |
Kábelköpeny típus | PUR |
Szigetelés egy vezetékes | TPM |
Egy vezetékes szerkezet | 82 x 0,15 mm |
Kábel színe | fekete |
Mechanikai tulajdonságok | |
Hajlítási sugarú kábel rögzítve | ≥ 7,5 x Ø |
Hajlítási ciklusok | 5 millió |
Megengedett gyorsulás | 5 m/s² |
Utazási távolság, vízszintes | 20 m |
Utazási sebesség | ≤ 300 m/min |
Termikus tulajdonságok | |
Hőmérséklet-tartomány kábel mozgatva innen/felé | -20 °C / 80 °C |
Hőmérséklet-tartomány kábel rögzítve tól/hoz | -40 °C / 80 °C |
Más funkciók | |
Halogén mentes | igen |
Biztonsági figyelmeztetések
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Letöltések
Adatlap
Adatlap 77 1434 0000 50003-1000
Letöltés
Tanúsítvány
UL tanúsítvány
Letöltés
REACH
77 1434 0000 50003-1000
Letöltés
RoHS
77 1434 0000 50003-1000
Letöltés
China RoHS
77 1434 0000 50003-1000
Letöltés
EU megfelelőségi nyilatkozat
Kisfeszültségű irányelv
Letöltés
UKCA megfelelőségi nyilatkozat
Elektromos berendezések
Letöltés
CAD fájlok
Válassza ki a kívánt formátumot