Menü
vissza
  1. Termékek
  2. Automatizálási technológia - feszültség és teljesítmény biztosítása
  3. M12-L
  4. M12 panelre szerelhető csatlakozó, : 4, árnyékolatlan, THR, IP68, UL 2238, M16x1,5, elülső rögzítés
Cikkszám: 86 0243 0000 00044

M12 panelre szerelhető csatlakozó, : 4, árnyékolatlan, THR, IP68, UL 2238, M16x1,5, elülső rögzítés

M12-L, 823-es sorozat, Automatizálási technológia - feszültség tápellátás
Hasonlítsa össze a terméket
Letöltések
Általános jellemzők
továbbkevesebb
Alkatrész sz. 86 0243 0000 00044
Csatlakozó kialakítása panelre szerelhető csatlakozó
Programmazione L-kódolt
Verzió Csatlakozó stift egyenes
Rögzítés módja csavar
Csatlakoztatás típusa THR
Védelmi szint IP68
Csatlakozási keresztmetszet max. 1,50 mm² érvéghüvellyel, / max. 2,50 mm² érvéghüvely nélkül / AWG 16 érvéghüvely / AWG 14 érvéghüvely nélkül
Hőmérséklet tartomány tól/ig -40 °C / 105 °C
Mechanikus élettartam > 100 csatlakoztatási ciklusok
Tömeg (gr) 9.65
Vámtarifaszám 85369010
Névleges feszültség 63 V
Névleges impulzusfeszültség 1500 V
Névleges áramerősség 16,0 A
Szigetelési ellenállás > 1010 Ω
Szennyezettségi fok 3
Túlfeszültség kategória III
Anyagcsoport I
EMV megfelelőség árnyékolatlan
Az érintkező test anyaga PA
Érintkező anyaga CuZn (sárgaréz)
Érintkező bevonat Au (arany)
Záró anyag nikkelezett öntött cink
REACH SVHC CAS 7439-92-1 (Lead)
Jelen lévő PFAS b453210e-0b86-4ed4-a8f0-773386bd1a86
Tanúsítások UL 2238
Kisfeszültségű irányelv 2014/35/EU (EN 60204-1:2018 | 2011/65/EU;EN 50581:2012 | 2014/35/EU;EN 60529:1991)
RoHS irányelv 2011/65/EU (EN 50581:2012)
Biztonsági figyelmeztetések
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
M12-L
86 0243 0000 00044