Cikkszám: 99 5171 760 08
M16 Kábelre szerelhető csatlakozó, : 8 (08-a), 4,1-7,8 mm, árnyékolatlan, krimpelt (a krimpérintkezőket külön kell megrendelni), IP67, rövid változat
M16 IP67, Sorozat 423, Miniatűr csatlakozók
Általános jellemzők
többkevesebbAlkatrész sz. | 99 5171 760 08 |
Csatlakozó kialakítása | Kábelre szerelhető csatlakozó |
Szabványos típus | DIN EN 61076-2-106 |
Verzió | egyenes tűs csatlakozó |
Csatlakozó reteszelő rendszer | csavar |
Felmondás | krimpelt (a krimpérintkezőket külön kell megrendelni) |
Védettségi fok | IP67 |
Keresztmetszeti terület | 0,14-0,75 mm² / AWG 26-20 |
Kábel kimenet | 4,1-7,8 mm |
Hőmérséklet tartomány tól/ig | -40 °C / 100 °C |
Mechanikus működés | > 500 csatlakoztatási ciklus |
További információk | rövid változat |
Súly (gr) | 17.63 |
Vámtarifaszám | 85369010 |
Származási ország | DE |
Elektromos paraméterek
többkevesebbNévleges feszültség | 32 V |
Névleges impulzusfeszültség | 500 V |
Névleges áram | 5,0 A |
Szennyezettségi fok | 2 |
Túlfeszültség kategória | II |
Anyagcsoport | III |
EMV megfelelőség | árnyékolatlan |
Pajzs csatlakozás | kábelbilincs |
Anyag
többkevesebbA ház anyaga | CuZn (nikkelezett sárgaréz) |
Az érintkező test anyaga | PBT |
Érintkező bevonat | a krimpérintkezőtől függően (tartozékok) |
Záró anyag | CuZn (sárgaréz) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP szám | d407c1e4-28c5-4349-a0e2-751c6ca9152c |
Osztályozások
többkevesebbETIM 9.0 | EC002635 |
Megfelelőségi nyilatkozatok
többkevesebbKisfeszültségű irányelv | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
RoHS irányelv | 2011/65/EU (EN 50581:2012) |
Biztonsági figyelmeztetések
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Letöltések
Adatlap
Adatlap 99 5171 760 08
Letöltés
REACH
99 5171 760 08
Letöltés
RoHS
99 5171 760 08
Letöltés
China RoHS
99 5171 760 08
Letöltés
EU megfelelőségi nyilatkozat
Kisfeszültségű irányelv
Letöltés
UKCA megfelelőségi nyilatkozat
Elektromos felszerelés
Letöltés
EU megfelelőségi nyilatkozat
RoHS irányelv
Letöltés
UKCA megfelelőségi nyilatkozat
UK-RoHS
Letöltés
CAD fájlok
Válassza ki a kívánt formátumot