Part no.: 79 2454 20 03
Female angled connector, Contacts: 3, moulded on the cable, IP68, PUR, black, 3 x 1.50 mm², 2 m
7/8", series 870, Automation Technology - Voltage and Power Supply
General features
Moreless| Part no. | 79 2454 20 03 |
| Connector design | Female angled connector |
| Cable length | 2 m (Standard 2 m and 5 m. Other lengths are available on request.) |
| Connector locking system | screw |
| Termination | moulded on the cable |
| Degree of protection | IP68 |
| Cross-sectional area | 1.50 mm² / AWG 16 |
| Temperature range from/to | -25 °C / 80 °C |
| Mechanical operation | > 100 Mating cycles |
| Weight (g) | 206.00 |
| Customs tariff number | 85444290 |
| Country of Origin | DE |
Electrical parameters
Moreless| Rated voltage | 300 V (600 V UL) |
| Rated impulse voltage | 2500 V |
| Rated current | 13.0 A |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | I |
Material
Moreless| Contact body material | PUR |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| REACH SVHC |
CAS 7439-92-1 (Lead) |
| SCIP number | ac61871e-6319-4266-a3d4-4be3390062fc |
Classifications
Moreless| eCl@ss 11.1 | 27-06-03-11 |
| ETIM 9.0 | EC002638 |
Cable data
Moreless| Structure of the cable | |
| Cable diameter | 7.4 mm |
| Cross section | 3 x 1.50 mm² |
| Sheath material | PUR |
| Single-lead insulation | TPM |
| Single-lead structure | 82 x 0.15 mm |
| Cable color | black |
| Mechanical properties | |
| Bending radius, fixed cable | ≥ 7.5 x Ø |
| Bending cycles | 5 million |
| Permitted acceleration | 5 m/s² |
| Travel distance, horizontal | 20 m |
| Travel speed | ≤ 300 m/min |
| Thermal properties | |
| Temperature range cable in move from/to | -20 °C / 80 °C |
| Temperature range cable fixed from/to | -40 °C / 80 °C |
| Other features | |
| Halogen free | yes |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).