Menu
Back
  1. Products
  2. Automation Technology - Voltage and Power Supply
  3. 7/8"
  4. 7/8" Female angled connector, Contacts: 5, unshielded, moulded on the cable, IP68, UL, PUR, 5 x 1.50 mm², 5 m
Part no.: 77 1434 0000 50005-0500

7/8" Female angled connector, Contacts: 5, unshielded, moulded on the cable, IP68, UL, PUR, 5 x 1.50 mm², 5 m

Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 77 1434 0000 50005-0500
Connector design Female angled connector
Cable length 5 m
Version Connector socket angled
Connector locking system screw
Termination moulded on the cable
Degree of protection IP68
Cross-sectional area 1.50 mm² / AWG 16
Temperature range from/to -25 °C / 80 °C
Mechanical operation > 100 Mating cycles
Weight (g) 680.00
Customs tariff number 85444290
Rated voltage 300 V (600 V UL)
Rated impulse voltage 2500 V
Rated current (40 °C) 9.0 A
Pollution degree 3
Overvoltage category II
Insulating material group I
EMC compliance unshielded
Housing material PUR
Contact body material PUR
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 792eba64-e7f6-404c-9ecd-fb12d043bcb6
eCl@ss 11.1 27-06-03-11
ETIM 7.0 EC001855
Low Voltage Directive 2014/35/EU (EN 60529:1991;EN 60204-1:2018)
Cable data
Moreless
Structure of the cable
Cable diameter 8.7 mm
Cross section 5 x 1.50 mm²
Sheath material PUR
Single-lead insulation TPM
Single-lead structure 82 x 0.15 mm
Mechanical properties
Bending radius, fixed cable ≥ 7.5 x Ø
Bending cycles 5 million
Permitted acceleration 5 m/s²
Travel distance, horizontal 20 m
Travel speed ≤ 300 m/min
Thermal properties
Temperature range cable in move from/to -20 °C / 80 °C
Temperature range cable fixed from/to -50 °C / 80 °C
Other features
Halogen free yes
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 77 1434 0000 50005-0500
PDF
Certificates, UL certificate
Certificates
UL certificate
PDF, 280.61 KB
REACH
77 1434 0000 50005-0500
PDF
RoHS
77 1434 0000 50005-0500
PDF
China RoHS
77 1434 0000 50005-0500
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
7/8"
77 1434 0000 50005-0500