09 0381 274 08 | binder M12 Male receptacle, Contacts: 8, unshielded, solder, IP67

Menu

Menu

Products
Automation technology - Sensors and actuators
M12-A
M12 Male receptacle, Contacts: 8, unshielded, solder, IP67

Illustration 09 0381 274 08 - M12 Male receptacle, Contacts: 8, unshielded, solder, IP67 — Illustration

3D View 09 0381 274 08 - M12 Male receptacle, Contacts: 8, unshielded, solder, IP67 — 3D View

Scale drawing 09 0381 274 08 - M12 Male receptacle, Contacts: 8, unshielded, solder, IP67 — Scale drawing

Assembly instructions / Panel cut-out 09 0381 274 08 - M12 Male receptacle, Contacts: 8, unshielded, solder, IP67 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 0381 274 08 - M12 Male receptacle, Contacts: 8, unshielded, solder, IP67 — Contact arrangement (Plug-in side)

Part no.	09 0381 274 08
Connector design	Male receptacle
Type standard	DIN EN 61076-2-101
Version	Connector pin straight
Connector locking system	screw
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Temperature range from/to	-40 °C / 105 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	1.11
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	30 V
Rated impulse voltage	800 V
Rated current	2.0 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	III
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
Material seal	FPM
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	73a90c7c-d0a8-46c7-a040-6bd819b41af9

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.

Downloads

Data sheet 09 0381 274 08

CAD files

Select required format