Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M12-A
  4. M12-A Female cable connector, Contacts: 4, 4.0-8.0 mm, unshielded, cutting clamp, IP67
Part no.: 99 0528 12 04

M12-A Female cable connector, Contacts: 4, 4.0-8.0 mm, unshielded, cutting clamp, IP67

M12, series 713, Automation Technology - Sensors and Actuators
Compare product
Downloads
General features
Moreless
Part no. 99 0528 12 04
Connector design Female cable connector
Version Connector socket straight
Connector locking system screw
Termination cutting clamp
Degree of protection IP67
Cross-sectional area 0.34-0.75 mm² / AWG 22-18
Cable outlet 4.0-8.0 mm
Temperature range from/to -40 °C / 80 °C
Mechanical operation > 100 Mating cycles
Weight (g) 16.50
Customs tariff number 85369010
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current (40 °C) 4.0 A
Insulation resistance > 10⁸ Ω
Pollution degree 3
Overvoltage category II
Insulating material group III
EMC compliance unshielded
Housing material PA
Contact body material TPU
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material Zinc die-cast nickel-plated
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
eCl@ss 11.1 27-44-01-02
ETIM 7.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 99 0528 12 04
PDF
REACH
99 0528 12 04
PDF
RoHS
99 0528 12 04
PDF
China RoHS
99 0528 12 04
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
M12-A
99 0528 12 04