1. Products
  2. Automation technology - Sensors and actuators
  3. M12-A
  4. M12 Female cable connector, Contacts: 8, 5.5-8.6 mm, shieldable, screw clamp, IP68/IP69K, UL, Ecolab, stainless steel
Part no.: 99 1486 992 08

M12 Female cable connector, Contacts: 8, 5.5-8.6 mm, shieldable, screw clamp, IP68/IP69K, UL, Ecolab, stainless steel

M12-A, series 713, Automation Technology - Sensors and Actuators
Available numbers of contacts
Compare product
General features
Part no. 99 1486 992 08
Connector design Female cable connector
Type standard DIN EN 61076-2-101
Version Connector socket straight
Connector locking system screw
Termination screw clamp
Degree of protection IP68/IP69K
Cross-sectional area max. 0.50 mm² / AWG 20
Cable outlet 5.5-8.6 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 500 Mating cycles
Additional information stainless steel
Weight (g) 59.31
Customs tariff number 85369010
Country of Origin DE
Rated voltage 30 V
Rated impulse voltage 800 V
Rated current 2.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection Shielding ring
Housing material Stainless steel
Contact body material PA66 (UL94 HB)
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material Stainless steel
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number d248307e-4280-4e8a-a496-a14075865ef3
Approvals UL, Ecolab
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
  7. The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Data sheet
Data sheet 99 1486 992 08
Data sheet, Data sheet 99 1486 992 08
UL certificate
PDF, 320.48 KB
99 1486 992 08
99 1486 992 08
China RoHS
99 1486 992 08
CAD files
Select required format
99 1486 992 08