Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 IP67 Male cable connector, Contacts: 7 (07-a), 4.1-7.8 mm, unshielded, crimping (Crimp contacts must be ordered separately), IP67, UL, Short version
Part no.: 99 5125 740 07

M16 IP67 Male cable connector, Contacts: 7 (07-a), 4.1-7.8 mm, unshielded, crimping (Crimp contacts must be ordered separately), IP67, UL, Short version

Compare product
Downloads
General features
Moreless
Part no. 99 5125 740 07
Connector design Male cable connector
Version Connector pin straight
Connector locking system screw
Termination crimping (Crimp contacts must be ordered separately)
Degree of protection IP67
Cross-sectional area see crimp contacts under accessories
Cable outlet 4.1-7.8 mm
Temperature range from/to -40 °C / 100 °C
Mechanical operation > 500 Mating cycles
Additional information Short version
Weight (g) 30.68
Customs tariff number 85369010
Rated voltage 125 V
Rated impulse voltage 800 V
Rated current (40 °C) 5.0 A
Insulation resistance ≥ 10¹⁰ Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance unshielded
Housing material CuZn (Brass nickel plated)
Contact body material PBT (UL94 V-0)
Contact material depending on crimp contact (accessory)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 2fe18107-97ba-444b-893b-fdf5d43dc4b3
eCl@ss 11.1 27-44-01-02
ETIM 7.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 99 5125 740 07
PDF
Certificates, UL certificate
Certificates
UL certificate
PDF, 317.82 KB
REACH
99 5125 740 07
PDF
RoHS
99 5125 740 07
PDF
China RoHS
99 5125 740 07
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
M16 IP67
99 5125 740 07