Menu
Back
  1. Products
  2. Miniature connectors
  3. Push-Pull IP67
  4. Push-Pull Male cable connector, Contacts: 4, 4.0-8.0 mm, shieldable, solder, IP67
Part no.: 99 4809 00 04

Push-Pull Male cable connector, Contacts: 4, 4.0-8.0 mm, shieldable, solder, IP67

Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 99 4809 00 04
Connector design Male cable connector
Version Connector pin straight
Connector locking system Push-Pull
Termination solder
Degree of protection IP67
Cross-sectional area max. 0.75 mm² / AWG 18
Cable outlet 4.0-8.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 1000 Mating cycles
Weight (g) 23.58
Customs tariff number 85369010
Rated voltage 250 V
Rated impulse voltage 1500 V
Rated current (40 °C) 6.0 A
Insulation resistance ≥ 10¹⁰ Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance shieldable
Shield connection Shield clamping
Housing material PA GF 25
Contact body material PBT (UL94 V-0)
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 97092314-3767-453a-989a-89eca56f296d
eCl@ss 11.1 27-44-01-02
ETIM 7.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 99 4809 00 04
PDF
REACH
99 4809 00 04
PDF
RoHS
99 4809 00 04
PDF
China RoHS
99 4809 00 04
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Push-Pull IP67
99 4809 00 04