Menu
Back
  1. Products
  2. Miniature connectors
  3. Snap-in IP67
  4. Snap-In IP67 Female panel mount connector, Contacts: 12, unshielded, solder, IP67, VDE
Part no.: 99 9136 70 12

Snap-In IP67 Female panel mount connector, Contacts: 12, unshielded, solder, IP67, VDE

Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 99 9136 70 12
Connector design Female panel mount connector
Version Connector socket straight
Connector locking system snap-in
Termination solder
Degree of protection IP67
Cross-sectional area max. 0.25 mm² / AWG 24
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 6.22
Customs tariff number 85369010
Rated voltage 60 V
Rated impulse voltage 800 V
Rated current (40 °C) 2.0 A
Insulation resistance ≥ 10¹⁰ Ω
Pollution degree 2
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material PA
Contact body material PA (UL94 HB) green
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 570e015d-b04c-41de-829a-c2e6c948a032
eCl@ss 11.1 27-44-01-02
ETIM 7.0 EC002635
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads
Data sheet
Data sheet 99 9136 70 12
PDF
Certificates, VDE certificate
Certificates
VDE certificate
PDF, 264.66 KB
REACH
99 9136 70 12
PDF
RoHS
99 9136 70 12
PDF
China RoHS
99 9136 70 12
PDF
CAD files
Select required format
Snap-in IP67
99 9136 70 12