Menü
vissza
Cikkszám: 79 5475 100 05

7/8" kettős elosztó, : 5, árnyékolatlan, IP68

7/8", 820/870-es sorozat, Automatizálási technológia - feszültség tápellátás
Elérhető Pólusszámok
Hasonlítsa össze a terméket
Letöltések
Általános jellemzők
továbbkevesebb
Alkatrész sz. 79 5475 100 05
Csatlakozó kialakítása kettős elosztó
Programmazione T-kódolt
Verzió T-darab
Rögzítés módja csavar
Védelmi szint IP68
Hőmérséklet tartomány tól/ig -25 °C / 80 °C
Mechanikus élettartam > 100 csatlakoztatási ciklusok
Tömeg (gr) 84.00
Vámtarifaszám 85444290
Származási ország DE
Névleges feszültség 400 V
Névleges impulzusfeszültség 4000 V
Névleges áramerősség 5,6 A
Szigetelési ellenállás > 1010 Ω
Szennyezettségi fok 3
Túlfeszültség kategória II
Anyagcsoport I
EMV megfelelőség árnyékolatlan
Az érintkező test anyaga PUR
Érintkező anyaga CuSn (bronz) / CuZn (sárgaréz)
Érintkező bevonat Au (arany)
REACH SVHC CAS 7439-92-1 (Lead)
Jelen lévő PFAS SCIP-number not available
Kisfeszültségű irányelv 2014/35/EU (EN 60529:1991 | 2014/35/EU;EN 60204-1:2018)
Copper (9903.78.01) 0.003086 kg
Biztonsági figyelmeztetések
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
7/8"
79 5475 100 05