Menu
Part no.
Menu
ll_Close
Part no.
binder SWEDEN
... show all
Miniature connectors
Filter products
Connector type
The connector type can be used to distinguish our products for installation in a device housing from cable parts. The connector type describes the difference between connectors that are mounted on enclosures, connectors that are mounted on cables, and other connection componentsdistributing signal and power.
Number of contacts
This indicates the number of contacts the connector has.
Gender
A connector consists of the male part (pin) and the female part (socket). Depending on the design, the male or female part is either permanently installed or are located at the end of a cable.
Version
The choice of version allows the definition of the cable outgoing.
Locking Type
The locking system describes how the pin and socket elements are joined.
Termination
The termination type determines how cables, single wires or PCBs can be joined with the connector.
Shielded Option
Electromagnetic compatibility (EMC) means that a connector is shielded or shieldable. This is required when it is necessary to protect the signals or data conducted by the connector, as well as to protect external devices, from disturbance due to electromagnetic effects.
IP-Rating
The degrees of protection according to IEC60529 apply to various articles and provide information on protection against the intrusion of water and solids such as dust.
Material of housing
Depending on the area of application or requirements, connectors are made of different materials. We offer metal and plastic housings for our items as the housing material.
Rated current
The rated current is the electrical current that is assigned to the connector.
Rated voltage
The rated voltage is the electrical voltage assigned to the connector.
Locking material
Depending on the technical requirements or performance data of the connector, the locking mechanism is made of plastic or metal.
Industry
The most important sectors recommended for the requirements, standards and typical applications of the corresponding binder articles.
Mounting orientation
The mounting orientation for flange connectors defines the side from which an item can be mounted.
Cross section
The connection cross-section defines the possible size of a stranded wire on a contact in the flange or field attachable connector. Cross-sections from 0.08mm² to 6.0mm² are possible here. Since various industry are also using wires according to the American Wire Gauge (AWG), both units are reflected.
Cable outlet
Field attachable connectors can be assembled with different cables. The cable aperture indicates the possible cable diameters that can be used on an article.
Series
The series indicates the product category of binder circular connectors and serves as a guide for selection.
Contact Plating
The contact surface refers to the plating of the contacts (e.g., gold or silver) and affects conductivity, corrosion resistance, and the service life of the circular connector.
Show products
  1. Products
  2. Miniature connectors
  3. ELC

Snap-in ELC connectors in Medical Grade Design

Series PDF (448 KB)
Accessory as PDF (72 KB)

ELC Connectors with Snap-in Latch

Our snap-in ELC connectors of the Series 570 provide a reliable and durable solution for Medical Grade applications. These ELC connectors are characterised by a unique snap-in locking system using a latch hook, ensuring over 5,000 mating cycles and thereby meeting the high requirements of many OEMs of Medical Grade devices.

The snap-in ELC connectors feature a robust PA66 plastic housing in grey-white, similar to RAL 9002. The Easy Locking Connector (ELC) is available as a 12-pin connector. The 12 gold-plated contacts allow a connection cross-section of 0.25 mm² and a rated current of 2 A at 150 V.

When unmated, the female panel mount connector against the ingress of liquids, splashing water and accidental electrical contact. When mated, the ELC connector provides degree of protection IP54.

Connectors in Medical Grade Design--Female panel mount connector_570_ELC_4_FD_schwarz_loet
09 1724 100 12
Snap-In Female panel mount connector, Contacts: 12, unshielded, solder, IP54, Front mounting
ELC, series 570, Miniature Connectors
Details
Connectors in Medical Grade Design--Male cable connector_570_ELC_1_KS_schwarz_t
99 1721 100 12
Snap-In Male cable connector, Contacts: 12, 6.0-8.0 mm, unshielded, solder, IP54
ELC, series 570, Miniature Connectors
Details
Connectors in Medical Grade Design--Male cable connector_570_ELC_1_KS_schwarz_t
99 1721 102 12
Snap-In Male cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP54
ELC, series 570, Miniature Connectors
Details
Report error on this page
You weren’t able to find a suitable product? Contact us now!
+46 8 662 02 85 Contact form