Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 IP67 Male cable connector, Contacts: 6 (06-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version
Part no.: 99 5121 60 06

M16 IP67 Male cable connector, Contacts: 6 (06-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version

General features
Moreless
Part no. 99 5121 60 06
Connector design Male cable connector
Version Connector pin straight
Connector locking system screw
Termination solder
Degree of protection IP68
Cross-sectional area max. 0.75 mm² / AWG 18
Cable outlet 4.1-7.8 mm
Temperature range from/to -30 °C / 95 °C
Mechanical operation > 500 Mating cycles
Additional information Short version
Weight (g) 0.00
Customs tariff number 85369010
Rated voltage 150 V
Rated impulse voltage 1500 V
Rated current (40 °C) 5.0 A
Pollution degree 2
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection cable clamp
Housing material CuZn (Brass nickel plated)
Contact body material PBT
Contact material CuZn (brass)
Contact plating Ag (silver)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 4d50c858-3230-421a-9125-8ac47311f233
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
M16 IP67
99 5121 60 06