Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 Male cable connector, Contacts: 19 (19-a), 4.1-7.8 mm, shieldable, solder, IP68, UL, Short version
Part no.: 99 5461 60 19

M16 Male cable connector, Contacts: 19 (19-a), 4.1-7.8 mm, shieldable, solder, IP68, UL, Short version

M16 IP67, series 423, Miniature Connectors
General features
Moreless
Part no. 99 5461 60 19
Connector design Male cable connector
Type standard DIN EN 61076-2-106
Version Connector pin straight
Connector locking system screw
Termination solder
Degree of protection IP68
Cross-sectional area max. 0.25 mm² / AWG 24
Cable outlet 4.1-7.8 mm
Temperature range from/to -30 °C / 95 °C
Mechanical operation > 500 Mating cycles
Additional information Short version
Weight (g) 39.75
Customs tariff number 85369010
Country of Origin DE
Rated voltage 32 V
Rated impulse voltage 500 V
Rated current 3,0 A
Pollution degree 2
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection cable clamp
Housing material CuZn (Brass nickel plated)
Contact body material PBT
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 48fd25a2-6158-44e9-870a-034383b85d10
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  5. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  6. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 99 5461 60 19
PDF
Data sheet, Data sheet 99 5461 60 19
Certificates
UL certificate
PDF, 955.00 KB
REACH
99 5461 60 19
PDF
RoHS
99 5461 60 19
PDF
China RoHS
99 5461 60 19
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
PDF
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
UK-RoHS
PDF
CAD files
Select required format
M16 IP67
99 5461 60 19