Menu
Back
  1. Products
  2. Miniature connectors
  3. Snap-in IP67
  4. Snap-In IP67 Female cable connector, Contacts: 5, unshielded, moulded on the cable, IP67, VDE, PUR, 5 x 0.75 mm², 2 m
Part no.: 79 9158 120 05

Snap-In IP67 Female cable connector, Contacts: 5, unshielded, moulded on the cable, IP67, VDE, PUR, 5 x 0.75 mm², 2 m

Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 79 9158 120 05
Connector design Female cable connector
Cable length 2 m
Connector locking system snap-in
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.75 mm²
Temperature range from/to -25 °C / 70 °C
Mechanical operation > 500 Mating cycles
Weight (g) 102.00
Customs tariff number 85444290
Rated voltage 125 V
Rated impulse voltage 1500 V
Rated current (40 °C) 5.0 A
Insulation resistance > 10¹⁰ Ω
Pollution degree 2
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Voltage 1750 V DC
Housing material PUR
Contact body material PA66 (UL94 V0)
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number SCIP-number not available
eCl@ss 11.1 27-06-03-11
ETIM 7.0 EC001855
Cable data
Moreless
Structure of the cable
Cable diameter 8.2 mm
Cross section 5 x 0.75 mm²
Sheath material PUR
Single-lead insulation EPK
Single-lead structure 24 x 0.20 mm
Electrical properties
Conductor resistance 26.7 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 10 x Ø
Thermal properties
Temperature range cable fixed from/to -40 °C / 90 °C
Other features
Halogen free yes
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Downloads
Data sheet
Data sheet 79 9158 120 05
PDF
Certificates, VDE certificate
Certificates
VDE certificate
PDF, 264.66 KB
REACH
79 9158 120 05
PDF
RoHS
79 9158 120 05
PDF
China RoHS
79 9158 120 05
PDF
CAD files
Select required format
Snap-in IP67
79 9158 120 05