09 0731 601 04 | binder M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67

Menu

Menu

Part no.

Productrequest

Wird geladen...

Products
Automation technology - Data transmission
M12-D
M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67

Illustration 09 0731 601 04 - M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67 — Illustration

3D View 09 0731 601 04 - M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67 — 3D View

Conductor layout 09 0731 601 04 - M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67 — Conductor layout

Scale drawing 09 0731 601 04 - M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67 — Scale drawing

Contact arrangement (Plug-in side) 09 0731 601 04 - M12 Male panel mount connector, Contacts: 4, shieldable, SMT, IP67 — Contact arrangement (Plug-in side)

Part no.	09 0731 601 04
Connector design	Male panel mount connector
Type standard	DIN EN 61076-2-101
Version	Connector pin straight
Connector locking system	screw
Termination	SMT
Degree of protection	IP67
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	2.14
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	250 V
Rated impulse voltage	2500 V
Rated current	4.0 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Transmission rate	CAT 5
Insulating material group	II
EMC compliance	shieldable
Shield connection	Shielding plate
Voltage	250 V DC

Housing material	CuZn (Brass nickel plated)
Contact body material	LCP
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	7d538d45-b682-4346-a8bc-4dcefe67ff1a

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).

Downloads

Data sheet 09 0731 601 04

CAD files

Select required format