Menu
Part no.
Productrequest
Menu
ll_Close
Part no.
Productrequest
Wird geladen...
... show all
Miniature connectors
Filter products
Connector type
The connector type can be used to distinguish our products for installation in a device housing from cable parts. The connector type describes the difference between connectors that are mounted on enclosures, connectors that are mounted on cables, and other connection componentsdistributing signal and power.
Number of contacts
This indicates the number of contacts the connector has.
Gender
A connector consists of the male part (pin) and the female part (socket). Depending on the design, the male or female part is either permanently installed or are located at the end of a cable.
Version
The choice of version allows the definition of the cable outgoing.
Locking Type
The locking system describes how the pin and socket elements are joined.
Termination
The termination type determines how cables, single wires or PCBs can be joined with the connector.
Coding
The connector elements, pin and socket, must be brought into form-fitting alignment with one another (coding) before locking. This prevents mismating.
Shielded Option
Electromagnetic compatibility (EMC) means that a connector is shielded or shieldable. This is required when it is necessary to protect the signals or data conducted by the connector, as well as to protect external devices, from disturbance due to electromagnetic effects.
IP-Rating
The degrees of protection according to IEC60529 apply to various articles and provide information on protection against the intrusion of water and solids such as dust.
Material of housing
Depending on the area of application or requirements, connectors are made of different materials. We offer metal and plastic housings for our items as the housing material.
Rated current
The rated current is the electrical current that is assigned to the connector.
Rated voltage
The rated voltage is the electrical voltage assigned to the connector.
Industry
The most important sectors recommended for the requirements, standards and typical applications of the corresponding binder articles.
Mounting orientation
The mounting orientation for flange connectors defines the side from which an item can be mounted.
Mounting thread
There are different thread sizes for the device-side connection, depending on the design. These are available in different variants.
Cross section
The connection cross-section defines the possible size of a stranded wire on a contact in the flange or field attachable connector. Cross-sections from 0.08mm² to 6.0mm² are possible here. Since various industry are also using wires according to the American Wire Gauge (AWG), both units are reflected.
Cable outlet
Field attachable connectors can be assembled with different cables. The cable aperture indicates the possible cable diameters that can be used on an article.
Series
The series indicates the product category of binder circular connectors and serves as a guide for selection.
Contact Plating
The contact surface refers to the plating of the contacts (e.g., gold or silver) and affects conductivity, corrosion resistance, and the service life of the circular connector.
Show products
  1. Products
  2. Miniature connectors
  3. M16-X

Miniature M16 connector X-coded

Series PDF (598 KB)
Accessory as PDF (148 KB)

The M16-X connectors from series 415 by binder are an outstanding solution for industrial applications requiring high data transmission rates and reliable connectivity. Thanks to their M16-X coded technology, they support transmission speeds of up to 10 Gbit/s and are ideally suited for demanding Ethernet/IP, PROFINET and PoE applications in automation technology and robotics.

The series includes a male cable connector, a  female cable connector and a female panel mount connector for front mounting, all equipped with 8 contacts. The M16 connectors are certified to IP67 protection when mated, providing comprehensive protection against dust and water. Their shielded design also ensures excellent electromagnetic compatibility (EMC).

M16 connector X-coded

With a secure screw locking mechanism according to DIN EN 61076-2-106, the M16-X connectors from series 415 by binder provide a stable mechanical connection. They are available with solder or insulation displacement termination, offering installation flexibility. The M16 connectors of series 415 are characterised by their robust construction and durability, and offer a wide range of configuration options.

Automation Technology - Data Transmission--Female panel mount connector_415-X_4_FD
99 4174 90 08
M16 Female panel mount connector, Contacts: 8, shieldable, THR, IP67, M18x0,75, Rear mounting
M16-X, series 415, Miniature Connectors
Details
Automation Technology - Data Transmission--Male cable connector_415-X_1_KS
99 4171 00 08
M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67
M16-X, series 415, Miniature Connectors
Details
Automation Technology - Data Transmission--Female cable connector_415-X_2_KD
99 4172 00 08
M16 Female cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67
M16-X, series 415, Miniature Connectors
Details
Report error on this page
You weren’t able to find a suitable product? Contact us now!
+49 (0) 7132 325–0 Contact form