Part no.: 99 0639 37 05
M12 Male cable connector, Contacts: 4+FE, 8.0-13.0 mm, unshielded, screw clamp, IP67, M12x1.0, UL 2237 in preparation, with PE connection
M12-L, series 823, Automation Technology - Voltage and Power Supply
General features
MorelessPart no. | 99 0639 37 05 |
Connector design | Male cable connector |
Type standard | DIN EN IEC 61076-2-111:2018-10;VDE 0687-76-2-111:2018-10 |
Version | Connector pin straight |
Connector locking system | screw |
Termination | screw clamp |
Degree of protection | IP67 |
Cross-sectional area | max. 1.50 mm² with ferrule / max. 2.50 mm² without ferrule / AWG 16 with wire-end ferrule / AWG 14 without wire-end ferrule |
Cable outlet | 8.0-13.0 mm |
Temperature range from/to | -40 °C / 105 °C |
Mechanical operation | > 100 Mating cycles |
Additional information |
UL 2237 in preparation with PE connection |
Weight (g) | 49.07 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 63 V |
Rated impulse voltage | 1500 V |
Rated impulse voltage UL | 1500 V |
Rated current | 12 A (at 1.5 mm²/AWG 16) / 16 A (at 2.5 mm²/AWG 14) |
Insulation resistance | > 1010 Ω |
Pollution degree | 3 |
Overvoltage category | III |
Insulating material group | I |
EMC compliance | unshielded |
Material
MorelessHousing material | PA |
Contact body material | PA (UL94 V-0) |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 5d09d3ef-b836-40b4-8d83-f8fcd0913f08 |
Classifications
MorelessETIM 9.0 | EC002635 |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).