79 9179 000 03 | binder Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE

Menu

Menu

Products
Miniature connectors
Snap-in IP67
Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE

Illustration 79 9179 000 03 - Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE — Illustration

3D View 79 9179 000 03 - Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE — 3D View

Pin assignment plans 79 9179 000 03 - Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE — Pin assignment plans

Scale drawing 79 9179 000 03 - Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE — Scale drawing

Contact arrangement (Plug-in side) 79 9179 000 03 - Snap-In Twin distributor, Y-distributor, Contacts: 3, unshielded, pluggable, IP67, UL, VDE — Contact arrangement (Plug-in side)

Part no.	79 9179 000 03
Connector design	Twin distributor, Y-distributor
Version	Twin distributors
Connector locking system	snap-in
Termination	pluggable
Degree of protection	IP67
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 500 Mating cycles
Weight (g)	33.00
Customs tariff number	85444290
Country of Origin	DE

Rated voltage	250 V
Rated impulse voltage	2500 V
Rated current	7.0 A
Pollution degree	2
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass) / CuSn (bronze)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	eaa5ea36-ab3c-44dd-9e67-c4fba994a029

Approvals	UL, VDE

eCl@ss 11.1	27-06-03-11
ETIM 9.0	EC002638

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.

Downloads

Data sheet 79 9179 000 03

VDE certificate

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

CAD files

Select required format